News

Top 5 Data - November

November 2016
  • 1. Industry's first switches for Ethernet green

    Monitored Ethernet Switches that cut power usuage by up to 60%


    Monitored Ethernet Switches 5 & 8 port, SNMP, Modbus/TCP: Models SE305-T, SE308-T

    SE300 series is the industry’s first design for Ethernet Green®, IEEE802.3az - Energy Ethernet switches that cut power usage by up to 60%, significantly saving energy usage in the field and reducing total cost of ownership over 24/7.

    Advantech B+B SmartWorx SE300 series monitored switches can be used as plugand-play unmanaged switches right out of the box. Installing the iView² Network Management Software gives them basic monitoring and management capabilities as well. They bridge the gap between unmanaged switches and significantly more expensive, fully managed solutions.

    When enabled with iView2, these switches provide IP address assignment, allowing for a static IP address or an address that is discoverable via DHCP in the network. Then, these switches have the ability to use Modbus/TCP to communicate with HMI/SCADA software and SNMP to communicate with NMS (Networking Management Software) at the same time. This gives full access control to both control engineers and IT managers.

    Features & Benefits:
    • Communicates with HMI/SCADA software via Modbus/TCP
    • Integrated with iView2 - SNMP Management Software (free download)
    • Energy Efficient Ethernet (EEE), IEEE 802.3az for low energy consumption
    • Wide temperature range -40 to 75°C
    • DIN rail or wall/panel mountable
    • Dual 12 to 48 VDC power inputs for redundancy
    • EMS Level 3 Protection
    • Designed for hazardous locations: UL C1D2, ATEX Zone 2 (pending), IECEx (pending)
    • Port-based QoS feature for deterministic data transmission
    • Loop detection and event alarm
    • Power failure indicated by a relay and LED indicator
    Read the full brochure here
  • 2. H30 Flex Meter - Big Features, Small Package

    The go to meter designed with the needs of a cable tv operator in mind


    Your go to meter for installation, remote monitoring, or trouble shooting. Rugged, light-weight, and extremely easy to use. Install, maintain and troubleshoot digital and analog cable TV networks, onsite or remotely.


    The H30 Series meters are light weight hand-held units, packed with all the features needed to install and troubleshoot DOCSIS 3.0 networks and television systems using QAM digital modulation as well as NTSC analog signals.

    This handy little meter is even inexpensive enough to leave in your headend and use its unique in its class remote measurement and control capabilities to provide long term monitoring or to trouble shoot those hard to find, intermittent problems.


    Available for the first time in such a portable and affordable package, its real-time digital processing engine gives the installers the lab-precision measurements needed in today’s fulfillment environment.

    Features & Benefits:
    • Remote control & automatic software updates in an affordable package
    • User friendly and intuitive interface reducing the learning curve
    • Compact, rugged and light-weight with total reliability
    • Ergonomic handheld design with three buttons + thumbwheel
    • Long battery life, over 5 hours on a full charge!
    • Lab-quality precision and real-time digital processing
    • Comprehensive functions with pass/fail indicators
    • 100% automatic signal detection
    • Made in Televes with your quality warranty
  • 3. NZ Made Security & Automation System Kit

    Elite S Series Security & Automation - Kit #7


    The ESL KIT range have become phenomenally popular.

    Never the cheapest, their popularity stems from the brilliantly simple to follow instructions, written and illustrated by Oliver Pearce our fantastic training guru.

    The rugged dependability of the gear, the skilled and helpful installer support, and our massive 5 year warranty certainly helps when making a decision to invest in the right equipment.

    ESL System Features:
    • 5 year warranty on NZ manufactured products
    • Supports up to 8 programmable outputs for garage doors, gates, lighting, heating & more
    • One EliteControl system can be divided into 'two alarms' for multi tenancies
    • 8 time zones for automatic operation or restrictions
    • Built in dialler for land line monitoring
    • Up to 16 hardwired and/or wireless sensor inputs
    • Supports up to 100 swipe tags and/or keypad codes for simple arm/disarm and control functions
    • Supports up to 80 keyring remote buttons for arm/disarm and control
    • 255 recorder events. The EliteControl system stores security and control functions for recall purposes
    Kit Includes:
    • Elite S Lite control panel in cabinet with transformer
    • KP Icon OEM LCD keypad with time, temperature and control functions
    • SS-1C external siren/strobe, 114dB
    • Swan Quad 25kg pet friendly PIR sensors x2
    • DM12-7.4AH 12V 7.5Ah back up battery
    • PS209-R recessed internal siren, 114dB
    • 100m 4 core 0.2mm cable

      Expandable up to 8 hard wired zone inputs, a further 8 wireless zone inputs & up to 8 programmable outputs


    Read the full Elite S brochure here

  • 4. Make Twisted Pair Terminations EZ

    Simplify the process with these New CAT 5/6 Connectors


    EZ-RJ45 Cat 6 and Cat 5 Connectors


    The patented EZ-RJ45® Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimised by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves the performance! Reduces scrap, no wasted crimps. More reliable, higher performance.

    Features:
    • Through holes allow wire pairs to be inserted through front of connector for faster terminations
    • Works with solid or stranded wire
    • Simple one piece design...no bars or liners
    • RoHS compliant
    • EZ to verify wire sequence
    See the intruction brochure here
  • 5. Super-sized Home Entertainment

    Optoma hd93

    Features:
    • Enormous Pure Engine IV Generation: Impressive motion handling and clarity with PureMotion II and Ultra Detail processing
    • Set it and forget it - 20,000 hour LED light source
    • Ease of installation featuring center mounted 1.9x zoom lens and horizontal/vertical shift
    • Reference quality 2D and 3D high definition performance
    • Dynamic Black IV Generation: smoothly automatically adjusts lamp output based on brightness information for each frame to create a stunning contrast ratio. Bright scenes are crisp and clear, while dark scenes remain detailed with deep blacks which gives exceptional light and shade detail.
    • Superior LED technology: delivers enhanced image quality with a wide colour gamut, superior colour saturation and outstanding brightness
    • Connectivity: 1. HDMI x 2, 2. VGA in, 3. component, 4. composite video, 5. USB (service), 6. +12V Relay x 2, 7. Serial RS-232 for control, 8. VESA 3D Port x 1, 9. USB charging (5V/1.2A)
    Read the full brochure here
TO READ PREVIOUS TOP 5'S SEE THE ARCHIVE HERE

Available now from Active Electrical

Talk to your local branch for availability and pricing on your project here

Active Electrical is an electrical wholesaler with a committed team dedicated to sourcing the right products for the job at a competitive price.
If you'd like to work with us on a project either contact your local branch or apply for a business account here